|
|
|
CUTBEAM
HORIZONTAL
|
|
The
Cut Beam Horizontal option helps you to number the beams separately
in horizontal direction when beams are crossing over each
other. Let us consider a simple case of two beams crossing
over each other as shown in the fig.
|
|
|
|
|
|
In
the above fig. if a Cut Beam Horizontal is placed at node 5 then the beam between
node 4 and 6 are numbered separately as B2 and B3 instead
of a single beam B2.
|
|
CUTBEAM
VERTICAL
|
|
The Cut
Beam Vertical option is used in a similar way as Cut Beam Horizontal, to number the beams separately in the vertical
direction.
|
|
|
|
|
|
If
Cut Beam Vertical
is placed at node 5 then beam B5 in numbered as B5 and
B6 separately.
|
|
|
