|
IN-FQ-01.
How do I install Steel-Master
?
Answer
: The CD contains complete
Software in a folder with name Steel-Master.
Place software CD in CD drive. Run SETUP program
from Steel-Master
folder to start Installation and follow instructions
displayed.
Enter
your Company Name properly when asked for. It will
be printed on top of all outputs. Installation program
will ask for the Product Sr.No,enter this number
the same way as it is written on the software CD
By
default software is installed in "Ensoft
Steel-Master"
subfolder in "Program Files" folder of
your C drive. Although you can change the name of
this folder you are advised not to do so. The program
files are copied in the Ensoft Steel-Master
subfolder.
Installation
Program will create a "Ensoft Steel-Master"
subfolder in "Program" menu of "Start"
button. Ensoft Steel-Master
icon will be created on Desktop.
IN-FQ-02.
How do I connect Hardware Lock?
Answer:Installing
BLUE COLOUR USB Lock Driver :- If you
have received a USB Lock with Blue Colour , then
Insert Software CD into drive & connect USB
Lock in USB Port
- A
Dialog Box will display “Found
New Hardware Wizard”.
- Message
displayed in the dialog box is "Can
windows connect to windows update to search
for software upgrade ?"
-
"Select "No not this time".
- Next
Dialog box asks, “What do you
want the wizard to do? ” Select
"Install Software Automatically".Wait
for a while. Press "Finish"
to complete the installation.
- If
Windows can not locate USB Lock Driver files
Automatically then,select "I Will
choose the Driver to Install"
option instead of Install Automatically. Press
"Next".
- Press
"Have Disk" button
and Browse to the location of USBDrivers folder
in Software CD. Point to the
SentrUsb.INF file and Press
"Open" and "OK"
to continue.
- Press
"NEXT". Press
"FINISH" to complete installation.
- If
this procedure does not work, check if driver
is already present.
- Goto
Controlpanel -> SYSTEM -> Hardware
->Device Manager From the List check
whether "Hardware Lock"
item is present and has a Sentry USB Lock entry
with Question Mark. Right
Click with mouse and uninstall the Sentry Lock.
- Repeat
procedure from beginning to Reinstall USB Drivers.
Installing
WHITE Colour USB Lock Driver : - Insert
the Software CD into the CD-ROM drive. Connect
the USB Lock in the USB port
- Wait
for a while. A message will be displayed,
"Found
New Hardware" “Your Hardware is installed
and Ready For Use”.
- Click
on the program from desktop icon, It will start
running.
- If
“Lock not installed” or “Unknown
error” message appears, install the drivers
as below.
- From
START button Go to Setting
> CONTROL PANEL Select SYSTEMS
> Hardware > Device Manager
- Check
at the list and count USB Interface devices
to whether the USB lock is detected.
- Double
Click at + Human Interface Devices.
- It
will display a list of USB Human Interface
Devices
- Right
click with mouse on each USB Human Interface
Devices entry, With Properties
option under General Tab,Check
which entry is for Location : Sentry HID Lock.
Go to Driver Tab and select UPDATE DRIVERS option.
- A
Dialog Box will be displayed “Welcome
to Hardware Update Wizard”.
Select "No not this time". And Press
next. A Dialog Box appears.
- Select
"Install from a list or specific location
(Advanced)" and press Next.
- Select
HIDDrivers Folder from Software
CD location in Browse and Press Next. Then Click
to Finish. Click on the Software program icon
from desktop, It will start running.
Installing
Parallel Port Lock Driver: - If you have
received a Parallel Port Lock with the software,
then look for a marking on end as COMPUTER. This
end shall be attached at backside of your computer,on
Parallel Port
- Run
Install Parallel Port Lock Driver
from Steel-Master icon on the
Desktop to install the Driver. Alternatively
- Goto
C:\Program Files\Ensoft\Steel-Master\
folder and double click on DrvInstall.exe program
to install the Driver.
IN-FQ-03.
How do I Register Active-X Components?
Answer: Steel-Master installation program
will register the components automatically. This
takes few minutes. In case the installation program
fails to register these components a separate
option Register Active-X Components is provided
under 'Utilities' menu of main program. Run this
option to register these components.
IN-FQ-04.
How do I install MS-Access DAO / Jet Engine?
Answer: Steel-Master
stores the data files in Microsoft Access/ Office'97
format. Microsoft Access module of Office'97/
Office2000 must be installed on your computer.
While installing MS-Office 2000 it asks 'Whether
you want the backward compatibility for MS-Access
datafiles'. When this option is asked for it is
to be selected as Yes.
Microsoft
Access stores the Dao/Jet engine files in folder
C:\Program Files\Common Files\Microsoft
Shared\Dao.
If this folder is absent or Dao is not compatible
with Steel-Master
you need to install MS Access DAO / Jet Engine.
Steel-Master
CD contains a folder with name DaoInstall, which
contains the installation program for the DAO/ Jet
db Engine. If any one of the above messages appear
on the screen then run the SETUP program from the
Disk1 subfolder of the DaoInstall folder and follow
the instructions displayed by the Installation program.
This will install the Dao/jet engine properly on
your computer.
IN-FQ-05.
How do I install driver for Windows 2000 / XP
machine?
Answer
: DrvInstall.exe program is provided
alongwith to install the drivers required make
Steel-Master
run on computers with Windows 2000 / XP machine.
To run this program start Windows Explorer and
go to the folder where Build-Quant Software is
installed. By default the program is installed
in C:\Program Files\Ensoft Steel-Master\Bin
folder. From the list of program files displayed,
double click on file DrvInstall.exe. The Sentry
driver Installation dialogue box will appear on
the screen. Now click on the Install button. 'Successfully
Installed Sentrymsp.vxd' message will
then appear on the Screen.
Installation
of Steel-Master is now complete.
Steel-Master
has following programs
- SteelDes.exe
for Steel Section Design
- SteelLib.exe
for Steel Built-up Section Library Editor
- StWeld.exe
for Steel Weld Design
- FrAnaly.exe
for Frame/Truss Analysis
- FrDesign.exe
for Frame/Truss Design
IN-FQ-O6.
How do I run the software?
Answer
:From Start button of
Window'95/'98,
Select
Programs menu and choose Ensoft
Steel-Master
option. This will display a submenu.
Select
'Readme.Txt' option for reading
information regarding software.
Select
Set Parameters option for setting
default parameters.
Select
Uninstall option to uninstall Steel-Master
program from your hard disk.
You
can also start Steel-Master
using Windows Explorer. Go to the folder where program
is installed. By default the software is installed
in C:\Program Files\Ensoft Steel-Master\Bin
folder. From the list of program files displayed,
double click on the file SMASTER.exe.
The Main program of Steel-Master
will start running.
These
programs can be run by using Short-cuts
available on Desktop or START
button. IN-FQ-07.What
are settings required for Windows 7 OR VISTA O.S?
Answer
: SETTINGS ALTERNATIVE 1:
From
START button Go to Setting
> Control Panel
Select Security Centre > Other
Setting option
User account control to be turn OFF.
SETTINGS ALTERNATIVE 2:
From
START button Go to Setting
> CONTROL PANEL > User
account >
turn user account control off>
Uncheck checkbox for "use account
control to protect Computer"
Shut Down & Restart Vista O.S.
Start Running the Program.
|
Installation