|
DR-FQ-01.
How do I get Centre Line Plan with Grid Dimensions?
Answer
: In
the RCC Floor Plan Drawing Parameters dialog box
the Put Plan Dimensions check box is blank by
default, Click on the check box and create the
drawing once again. The dimensions will then appear
on the screen.
DR-FQ-02.
How do I print schedule
drawings in British Units?
Answer
: If
the user wishes to print Schedule Drawings in
British Units, while creating the new project,
units shall be selected as 'British Units' in
'Create New Project' dialog box.
DR-FQ-03.
How do I mark the beams
and slabs falling in same group as one type in
the plan drawings?
Answer
: In
the RCC Floor Plan Drawing Parameters dialog box
by default the Beam Sr. No and Slab Sr. No radio
buttons are active. When the Beam Type and Slab
Type option is selected then the program marks
the beam numbers and slab numbers falling in the
same group as one type respectively. The Type
No option shall be chosen only after design of
RCC Beams and Slabs (When .SIB and .SIS are ready)
DR-FQ-04.
How to plot a footing plan with center line dimensions
?
Answer
: Create RCC Plan drawing at the Plinth
level with center line dimensions by ticking the
"Show Dimensions in Plan" option. This
will create $RCCPLAN-ABCD-PL.dxf file. Then create
the Foundation Plan drawing using Floor -->
Plan Drawings --> Foundation Plan command which
will create $FOTPLAN-ABCD-PL.dxf file. Now Open
the RCC drawing $RCCPLAN-ABCD-PL.dxf file in CAD
Package. Give Insert Block command. Browse to
the Project Folder, select footing plan drawing
$FOTPLAN-ABCD-PL.dxf for superimposing. Remove
tick mark at Specify on screen option for both
Insertion point and Scale. This will place both
the drawings with (0,0) as origin and scale factor
1.0. Merged CAD files will be displayed when you
Click on Ok. |
