| |
|
| Bar-Be-Que
FAQ ::: |
| |
|
| FAQ
ANSWERS ::: |
BB-FQ-01
: What is Bar-Be-Que ?
Answer :Bar-Be-Que software is not EXCEL or any
spreadsheet based neither it runs under any CAD package.
It is a complete standalone software which generates the
to-the-scale sketches of each and every bar. Deduction
in the length for bending can be done with different ways,
as per IS or BS code or standard site compactible with
CAD packages.
BB-FQ-02
: How
to enter data of each bar in Bar-Be-Que ?
Answer :Program has 3 options for preparing Bar
Bending Schedules:
1. Data for each Bar can be entered manually. BBS is generated
with graphical sketch
2. Rebar Detail Drawing showing Bars can be read and BBS
generated in tabular form.
3. Formulator module can be used to generated bar dimensions
with simple data entry of objects dimensions.
BB-FQ-03
: How many Bar shapes
are covered in Bar-Be-Que ?
Answer :About 40 Bar shapes required for day-to-day
use are covered in this program. First character of
shape code gives the no. of bends in the bars.
For example:
Shape code 00 means straight bar with no bends
Shape code 11,12,14 means one bend
Shape code 21,22,29 means two bends etc.
Shape code 99 shall be used for any odd shape of the
bars.
BB-FQ-04
: Are deductions in length
due to Bar bends considered ?
Answer :While calculating the length of the
bars the deductions are done as per the codal provisions.
In case of BS code r factor is considered in the deduction
and in case of IS code k factor is considered.
BB-FQ-05
: Is any CAD package required
for printing Bar Bending Schedule sheets ?
Answer :No. Bar Bending Schedule sheets can
be printed directly from Bar-Be-Que without any CAD
package. However, if user desires BBS sheet outputs
can be stored in DXF compactible files and printed throught
a CAD package.
BB-FQ-06
: Does Bar-Be-Que prepared
optimized Bar cutting arrangements ?
Answer :Yes. Bar-Be-Que comes with a module
for generating optimized cutting arrangements for purchased
lengths of bars, to minimize the wastage of steel. It
will first calculated the requirement of steel with
diameterwise breakup. For each diameter of bar it will
sort the required cut lengths. It will use optimization
methods to arrange these cut lengths in purchased length
of bars, such that the wastage of steel is minimum. |
| |
 |
|
 |
| If
you still have unanswered questions after browsing the
material, please let us know about it by emailing us at:
info@ensoftindia.com |
|
