RM-FQ-01
: What is Road-Master
?
Answer : Road-Master software
has two modules, one for General Land Survey, Contour,
L-Section Plotting and other one for Earthwork Quantities
of Roads, Canals, Trenches etc. Land-Survey module generates
3-D view of ground from level data and contour maps
for any desired contour intervals. Program works out
excavation and filling quantities, for the proposed
land profiles. Road-Quant module generates cross-sections
at each chainage along the length of the road.
RM-FQ-02
: How do I workout cutting/filling
quantities of Land Profile ?
Answer : Land Survey module
is useful for doing earthwork calculations for any general
Land profile. The fieldbook data can entered manually.
Program will workout the reduced levels and generate
3D-view of ground profile. It will
workout the cutting/filling quantities with the purposed
level data entry.
RM-FQ-03
: Can I read Total Station
Equipment Data in Road-Master ?
Answer : Yes. Total Station
Equipment writes the level data in .XLS
or .TXT file format. The data from
these files can be copied to Road-Master Land Survey
Module. Program will generate contour drawing and L-Sections
of ground profile.
RM-FQ-04
: How do I workout cutting/filling
quantities of a Road Profile ?
Answer : Road Quant module
is useful for calculating Embankment Earthwork
quantities involved in Road Construction. Original ground
levels and formation levels are entered at each chainage
on both left and right sides. Using the formation slope
values, Program will workout Toe points levels and calculate
cutting/filling quantities involve.
RM-FQ-05
: Can I workout Hard
Rock/Soft Rock quantities ?
Answer : Yes. Hard Rock/Soft
Rock Top levels shall be entered at chainages where they
are present. Using these levels program will workout Hard
Rock/Soft Rock Top quantities.
RM-FQ-06
: Can I workout Non-Earthwork
layers above Enbankment ?
Answer : Yes. Non-Earthwork
layers levels for GSB, CRB, Bitumen etc. can also be
entered. Program will workout the quantities of these
layers.
RM-FQ-07
: Can I get L-Section
and Cross Section Drawings ?
Answer : Yes. Using the level
data program will directly generate L-Section and Cross
Section Drawing, Sketches without any CAD packages.
RM-FQ-08
: Can I read drawing
generated by Road-Master in a CAD Package ?
Answer : 3D View, Contour
Drawing, L-Section and Cross Sections generated by Road-Master
can be saved in DXF format. This format is compatible
with CAD packages in which these drawings can be read,
edited, printed or plotted. |
